10kV-630A歐式電纜前接頭

產品運用：
    10kV歐式前接頭，應用于10kV電纜分接箱、環網柜、充氣柜及高壓開關柜,直接安裝在設備套管上,作為進出線電纜連接及密封,為全絕緣、全密封、全屏蔽產品。
    產品采用國際先進的后注射絕緣層工藝，電氣性能達到國際領先水平，使用更安全、更可靠。安裝條件不受惡劣環境影響，防凝露、防污穢、免維護。產品應力處理引進國際先進技術，產品結構尺寸小，充分滿足了安裝空間的要求，是國際領先的預制式電纜頭。適用電纜截面25-630mm
10kV Front connector,used in 10kV cable distribution box, ring cabinet, inflatable cabinet and high voltage switchgear, installed directly on the equipment casing, as the inlet and outlet cable connection and sealing, for the whole insulation, sealed, fully shielded products。
     Products using the international advanced post-injection insulation technology, electrical performance to the international advanced level, the use of more secure, more reliable. installation conditions are not affected by harsh environments, anti-condensation, anti-pollution, maintenance-free. product stress handling the introduction of german technology, product structure size is small, fully meet the requirements of the installation space, is the world's leading prefabricated cable head. applicable cable cross section 25-630mm。
適合電纜：
聚合物絕緣（XLPE、ERP等）
Polymer insulation (XLPE, ERP)
銅或鋁導體
Copper or aluminium conductor(YJY or YJLV)
具有半導電或金屬屏蔽
Semiconducting or metallic screens
導體尺寸：25-630mm
The conductor size: 25-630mm
標準包裝：
前接頭本體
Front connector body
黑色防塵帽（非絕緣保護帽）
Black dust cap (non insulated protective cap)
應力錐
Cable adaptor
壓接端子
Crimp terminal
絕緣堵頭
Insulation plug
半導電帶
Semiconductive belt
雙頭螺栓及平墊、彈墊、螺帽
Double head bolt and flat pad, elastic pad, nut
銅接地線、硅脂、清潔紙
Copper grounding wire, silicon grease, cleaning paper
安裝標尺卡、安裝工具、安裝指導說明書
Install scale card, installation tools, installation instructions
產品出廠資料
Product information
產品結構：
雙頭螺栓：不銹鋼螺栓確保導體和套管緊密配合
Bolt: stainless steel bolts ensure conductor and bushing match closely
絕緣層：特有的配方和混煉技術確保預制絕緣橡膠的優良品質
Insulation layer: unique formula and hybrid technology ensure the high quality of prefabrication insulating rubber
絕緣子：環氧樹脂絕緣子內含有帶螺紋金屬件可以確保與雙頭螺栓緊密配合
Insulator: epoxy resin insulators containing threaded metal parts to ensure close coordination with the double headed bolt
內半導電層：預制的高品質導電橡膠有效的控制電場應力
Inner semi-conductive layer: prefabricated high quality conductive rubber effective control electric field stress
應力錐：不同尺寸的應力錐配合電纜使用，能確保密封以及電纜應力釋放
Cable adaptor:different size of cable adaptor work with cable, can ensure the sealing and cable stress release
外半導電層：預制的高品質導電橡膠與電纜屏蔽層搭接使屏蔽連續，并確保外半導電層處于接地狀態
Outer semi-conductive layer: Prefabricated high quality conductive rubber and cable shield overlap to make the shield continuous and ensure that the outer semiconducting layer is in a grounded state