產品應用:
35kV 630A 屏蔽型電纜后接頭連接于前接頭后面,后接頭后面還可以安裝后接頭或后接避雷器實現多回路進出線配置。適用于工頻交流電壓為35kV及以下電廠、變電站的配電裝置和高壓電氣中。產品采用國際先進的后注射絕緣層工藝,電氣性能達到國際領先水平,使用更安全、更可靠。安裝條件不受惡劣環境影響,防凝露、防污穢、免維護。產品應力處理引進國際先進技術,產品結構尺寸小,充分滿足了安裝空間的要求,是國際領先的預制式電纜頭。適用電纜截面50-500mm。
35kv 630A Rear connector connected to the front connector behind, after the back of the connector can also be installed after the rear or rear arrester to achieve multi-loop access line configuration. applicable to the frequency AC voltage of 35kV and below power plants, substation power distribution devices and high voltage electrical. Products using the international advanced post-injection insulation technology, electrical performance to the international advanced level, the use of more secure, more reliable. Installation conditions are not affected by harsh environments, anti-condensation, anti-pollution, maintenance-free. product stress handling the introduction of german technology, product structure size is small, fully meet the requirements of the installation space, is the world's leading prefabricated cable head. applicable cable cross section 50-500
產品包裝:
后接頭本體
應力錐,壓接端子
連接桿,雙頭螺栓
半導電帶
銅接地線、硅脂、清潔紙
安裝標尺卡、安裝指導說明書
產品出廠資料
Rear connector body
Stress cone,Crimping terminal
Connecting rod
Semiconductive belt
Copper grounding wire, silicon grease, cleaning paper
Install scale card, installation instruction manual
Product information